Zebralight SC53Fc AA Floody Neutro Blanco Alto CRI Linterna

.

Main Features and Specifications

• Cree XP-L2 EasyWhite LED
• Nominal CCT 4000K
• Typical CRI: 93-95
• Tint deviation: 2-step
• User Selectable Levels: 3 main levels (High, Medium and Low). Each main level can be programmed to one of its two sub-levels. The second sub-level of the each main levels can be further programmed to different brightness levels.
• Light Output (runtimes)
  • High:         H1 276 Lm (0.9 hr)   or    H2  231 Lm (1.6 hr) / 166 Lm (2.3 hrs) / 103 Lm (4.2 hrs)
  • Medium:   M1 54 Lm (8.5 hrs)    or    M2   25Lm (21 hrs) / 10 Lm (41 hrs) / 3.4 Lm (4.5 days)
  • Low:         L1  1.0 Lm (13 days)   or    L2   0.25 Lm (1.1 month) / 0.06 Lm (2.2 months) / 0.01 Lm (3.3 months)
  • Beacon Strobe Mode: 0.2Hz Beacon at Low / 0.2Hz Beacon at H1 / 4Hz Strobe at H1 / 19Hz Strobe at H1 
  • Light output are ANSI out the front (OTF) values. Runtimes tested (and parasitic drain estimated) using Panasonic Eneloop Pro AA batteries. Remaining battery power, about 10-20%, after step-down are not counted towards the runtimes.
• Operating Voltage Range: 0.7V - 2.0V
• Battery: One AA size NiMH, lithium or alkaline battery. Panasonic Eneloop or Eneloop Pro is highly recommended. Batteries are not included in the box.
• Parasitic Drain: Negligible (much less than the self discharging of a battery)
• Beam Type
  • Floody beam from frosted lens, with 90 degree beam spread
• Dimensions
  • Head Diameter: 0.96 inch (23.6 mm)
  • Length:    3inch (77.6 mm)
• Weight
  • 1.4 oz (40 gram)
• Features
• Battery capacity indicator (LED flashes 1-4 times, 4 short clicks to start)
• All levels are current regulated
• Low battery alert when the light is switched OFF (LED flashes if the battery voltage is below ~1.06V)
• Automatic stepping down from High to Medium, and from Medium to Low when battery capacity is low
• Durable electronic soft-touch switch
• Smart user interface provides fast and easy access to all brightness levels and beacon-strobes.
• Precision machined unibody casing from premium grade  aluminum bar stocks
• Proprietary heat sinking design bonds the LED board directly to the unibody aluminum casing
• Durable natural hard anodized finish (Type III Class I)
• Sealed and potted LED driver circuitry
• Tempered optical grade glass
• Preinstalled bezel down pocket clip
• Orange peel reflector
• Battery power can be disconnected by slightly unscrewing the tailcap to prevent unwanted activations or parasitic drain
• Waterproof to IPX8 (2 meters, 30 minutes)

Accessories in the box

• Two O-rings
• User Guide