Zebralight SC5c Mk II Neutral White High CRI Zaklamp

Main Features and Specifications

• Cree XP-L2 EasyWhite LED
• Nominal CCT 4000K
• Typical CRI: 93-95
• Tint deviation: 2-step MacAdam ellipse
• User Selectable Levels: 3 main levels (High, Medium and Low). Each main level can be programmed to one of its two sub-levels. The second sub-level of the each main levels can be further programmed to different brightness levels.
• Light Output (runtimes)
  • High:         H1 475 Lm (3min, then 352lm, total   min)   or    H2  352 Lm (  hr) / 236 Lm (  hrs) / 144 Lm ( hrs)
  • Medium:    M1 79 Lm ( hrs)    or    M2   40Lm ( hrs) / 18 Lm ( hrs) / 7.4 Lm ( hrs)
  • Low:         L1   2.8 Lm ( days)   or    L2   1.0 Lm ( days) / 0.28 Lm ( days) / 0.08 Lm ( months)
  • Beacon Strobe Mode: 0.2Hz Beacon at Low / 0.2Hz Beacon at H1 / 4Hz Strobe at H1 / 19Hz Strobe at H1 
  • Light output are ANSI out the front (OTF) values. Runtimes tested (and parasitic drain estimated) using Panasonic Eneloop Pro AA batteries. Remaining battery power, about 10-20%, after step-down are not counted towards the runtimes.
• Operating Voltage Range: 0.7V - 2.0V
• Battery: One AA size NiMH, lithium or alkaline battery. Panasonic Eneloop or Eneloop Pro is highly recommended. Batteries are not included in the box.
• Parasitic Drain: 2.4 uA (much less than the self discharging of a battery)
• Beam Type
  • 80 degree spill
  • 10 degree hot spot
• Dimensions
  • Head Diameter: 1.0 inch (25.4 mm)
  • Length:    3.2 inch (80.3 mm)
• Weight
  • 1.8 oz (49 gram) 
• Features
• Battery capacity indicator (LED flashes 1-4 times, 4 short clicks to start)
• All levels are current regulated
• Automatic stepping down from High to Medium, and from Medium to Low when battery capacity is low
• Durable electronic soft-touch switch
• Smart user interface provides fast and easy access to all brightness levels and beacon-strobes.
• Precision machined unibody casing from premium grade  aluminum bar stocks
• Proprietary heat sinking design bonds the LED board directly to the unibody aluminum casing
• Durable natural hard anodized finish (Type III Class I)
• Sealed and potted LED driver circuitry
• Battery reverse polarity protection
• Tempered optical grade glass
• Preinstalled bezel down pocket clip
• Orange peel reflector
• Battery power can be disconnected by slightly unscrewing the tailcap to prevent unwanted activations or parasitic drain
• Waterproof to IPX7 (2 meters, 30 minutes

Accessories in the box

• Two o-rings