Zebralight SC5w Mk II Neutral White Zaklamp

Main Features and Specifications

• Cree XP-L2 EasyWhite LED
• Nominal CCT 4500K
• Typical CRI: 83-85
• Tint deviation: 3-Step MacAdam ellipse
• User Selectable Levels: 3 main levels (High, Medium and Low). Each main level can be programmed to one of its two sub-levels. The second sub-level of the each main levels can be further programmed to different brightness levels.
• Light Output (runtimes)
  • High:         H1 550 Lm (3min, then 407lm, total 0.5 hr)   or    H2  407 Lm (0.9 hr) / 274 Lm (1.5 hrs) / 166 Lm (2.8 hrs)
  • Medium:    M1 92 Lm (4.9 hrs)    or    M2   46Lm (9.6 hrs) / 21 Lm (21 hrs) / 8.6 Lm (48 hrs)
  • Low:         L1   3.2 Lm (4.2 days)   or    L2   1.1 Lm (14 days) / 0.33 Lm (50 days) / 0.09 Lm (4.3 months)
  • Beacon Strobe Mode: 0.2Hz Beacon at Low / 0.2Hz Beacon at H1 / 4Hz Strobe at H1 / 19Hz Strobe at H1 
  • Light output are ANSI out the front (OTF) values. Runtimes tested (and parasitic drain estimated) using Panasonic Eneloop Pro AA batteries. Remaining battery power, about 10-20%, after step-down are not counted towards the runtimes.
• Operating Voltage Range: 0.7V - 2.0V
• Battery: One AA size NiMH, lithium or alkaline battery. Panasonic Eneloop or Eneloop Pro is highly recommended. Batteries are not included in the box.
• Parasitic Drain: 2.4 uA (much less than the self discharging of a battery)
• Beam Type
  • 80 degree spill
  • 10 degree hot spot
• Dimensions
  • Head Diameter: 1.0 inch (25.4 mm)
  • Length:    3.2 inch (80.3 mm)
• Weight
  • 1.8 oz (49 gram) 
• Features
• Battery capacity indicator (LED flashes 1-4 times, 4 short clicks to start)
• All levels are current regulated
• Automatic stepping down from High to Medium, and from Medium to Low when battery capacity is low
• Durable electronic soft-touch switch
• Smart user interface provides fast and easy access to all brightness levels and beacon-strobes.
• Precision machined unibody casing from premium grade  aluminum bar stocks
• Proprietary heat sinking design bonds the LED board directly to the unibody aluminum casing
• Durable natural hard anodized finish (Type III Class I)
• Sealed and potted LED driver circuitry
• Battery reverse polarity protection
• Tempered optical grade glass
• Preinstalled bezel down pocket clip
• Orange peel reflector
• Battery power can be disconnected by slightly unscrewing the tailcap to prevent unwanted activations or parasitic drain
• Waterproof to IPX7 (2 meters, 30 minutes

Accessories in the box

• Two o-rings