1S Bms / Pcb 4Mos - YH10A - 17A - 3.6V
Product specifications
Product description
Extra information
Reviews
Documents
In stock
€1.75
Shipping cost to Ukraine: €4.00 (1 item)
If your parcel is lost, damaged or destroyed, we’ll resend or refund. (More)(Less)
If Nova Poshta officially confirms that your parcel was lost, destroyed, or affected by another delivery issue, we will resolve it — either by reshipping your order or issuing a full refund.
The issue must be officially confirmed by Nova Poshta before we can take action.
Sometimes tracking says “Delivery is not possible” or “Not delivered according to manifest”. This is due to problems at Nova Poshta; it is a challenging time for them.
Overcharge protection:
- Charge detection voltage: 4.25 ± 0.025V
- Overcharge Detection Delay Time: 1000 ± 300ms
- Voltage power release: 4.05 ± 0.05V
About dismissal protection:
- Detection of more than discharge voltage: 2.5 ± 0.063V
- Detection delay too long discharge: 20 ± 6ms
- Overcharge release voltage: 3.0 ± 0.075V
Over current protection:
- Overcurrent detection voltage: 0.2 ± 0.015V
- Over current detection current: 13.0-17.0A
- Detection delay time: 0.5 - 1.7 ms
- Release condition: cut off tax
Short circuit protection:
- Detection condition: exterior short circuit
- Short detection delay time: 230-500us
- Liberation condition: shorted circuit
Inner resistance:
- Main Loop electrify resistance: VC = 3.8V; RDS≤25mΩ
Current consumption:
- Power consumption in normal operation: 3μA Typ, 8μA Max
This BMS-system can't balance a battery pack, it's only for the cutoff of under and over-voltage
- Charge detection voltage: 4.25 ± 0.025V
- Overcharge Detection Delay Time: 1000 ± 300ms
- Voltage power release: 4.05 ± 0.05V
About dismissal protection:
- Detection of more than discharge voltage: 2.5 ± 0.063V
- Detection delay too long discharge: 20 ± 6ms
- Overcharge release voltage: 3.0 ± 0.075V
Over current protection:
- Overcurrent detection voltage: 0.2 ± 0.015V
- Over current detection current: 13.0-17.0A
- Detection delay time: 0.5 - 1.7 ms
- Release condition: cut off tax
Short circuit protection:
- Detection condition: exterior short circuit
- Short detection delay time: 230-500us
- Liberation condition: shorted circuit
Inner resistance:
- Main Loop electrify resistance: VC = 3.8V; RDS≤25mΩ
Current consumption:
- Power consumption in normal operation: 3μA Typ, 8μA Max
This BMS-system can't balance a battery pack, it's only for the cutoff of under and over-voltage
Write Your Own Review